CCT SERIES PRODUCT FAMILY

What is it?

• A 2-port filter/Uncoupled “Duet” subsystem.
• Filter tuning remotely controlled.
• 2 tunable bandpass 4-pole filters, 2 single-port impedance matching networks each with its own low pass filter for harmonics suppression.
• Automated filter output switching termination not needed because the filters are not combined to one antenna.

What does it do?

• Enables 2 transceivers to operate simultaneously with each radio on its own antenna in the 225-400 MHz range, in any combination of transmit/receive modes.
• Accepts MIL-STD-188 serial remote control to 7,000 frequencies per filter for filter tuning, USN standard interface.
• External adapter available to accept remote control interface from ARC-210 family of radios. Can also provide an adapter for other radio interfaces.
• Because there is no combiner, not needed are the other subsystem operation management functions such as transmit inhibit during filter tuning, adjacent channel separation management, cross tuning prevention, etc.

What is it?

• A 4-port filter/multicoupler.  
• 4 tunable bandpass 4-pole filters, extremely-low-loss, 4-port impedance matching network with low pass filter for harmonics suppression, and filter output switching termination.
• Filter tuning remotely controlled.
• Built-in filter/termination RF switching automatically controlled by Multicoupler.
• Includes local control via front panel display, keypad and indicator lights, and remote control via serial interface.

What does it do?

• Enables 4 transceivers to operate simultaneously on one antenna in the 225-400 MHz range, in any combination of transmit/receive modes. 
• Accepts MIL-STD-188 serial remote control to 7,000 frequencies per filter for filter tuning and remote diagnostics, USN standard interface.  
• External adapter available to accept remote control interface from ARC-210 family of radios. Can also provide anadapter for other radio interfaces.
• From previous (pre-2005 year) CCT-4 multicoupler versions: Obsoletefunctions and parts deleted. Diminished source parts replaced. Backward/forward interchangeability retained.  
• Includes many other subsystem operation management functions such as transmit inhibit during filter tuning, adjacent channel separation management, cross tuning prevention, etc.

What is it?

• A 4-port filter/Uncoupled “Quad” subsystem.
• Filter tuning remotely controlled.
• 4 tunable bandpass 4-pole filters, extremely-low-loss, 4 single-port impedance matching networks each with its own low pass filter for harmonics suppression.
• Automated filter output switching termination not needed because the filters are not combined to one antenna.

What does it do?

• Enables 4 transceivers to operate simultaneously with each radio on its own antenna in the 225-400 MHz range, in any combination of transmit/receive modes.
• Accepts MIL-STD-188 serial remote control to 7,000 frequencies per filter for filter tuning, USN standard interface.
• External adapter available to accept remote control interface from ARC-210 family of radios. Can also provide an adapter for other radio interfaces.
• From previous multicoupler version: Obsolete functions and parts deleted. Diminished source parts replaced. Backward/forward interchangeability retained.
• Because there is no combiner, not needed are the other subsystem operation management functions such as transmit inhibit during filter tuning, adjacent channel separation management, cross tuning prevention, etc.

What is it?

• Single filter from the standard multicoupler design in a 19 inch rack mountable box for sheltered environment.
• Includes a single port impedance matching network with lowpass filter.
• Remote controlled via serial interface. Will need new board.

What does it do?

• The 225-400 MHz tuneable bandpass filters add to the isolation between separate antennas to enable multiple collocated radios to operate simultaneously in the 225-400 MHz range.
• The fixed lowpass filter reduces harmonic interference above 400 MHz.

What is it?

• A 2-port filter/Uncoupled “Duet” subsystem.  
• Filter tuning remotely controlled.  
• 2 tunable bandpass 4-pole filters, 2 single-port impedance matching networks each with its own low pass filter for harmonics suppression.
• Built-in M3B Switch Bank for bypass of UHF filters for multi-band radio operation in other bands/modes. Also enables USOD flexible integration into RFPinc’s M3B RFD.  
• Built-in M3B Switch Bank includes choices of both individual bypasses for each radio, or any 1 of 4 bypass.
• Automated filter output switching termination not needed because the filters are not combined to one antenna.
• Includes manual patch panel on rear face so that the USOD can be connected in different configurations either as stand alone or as part of RFPinc’s M3B RFD.

What does it do?

• Enables multi-band software defined radios operation in different bands a modes.
•  Via UHF tunable filters, enables 2 transceivers to operate simultaneously with each radio on its own antenna in the 225-400 MHz range, in any combination of transmit/receive modes.
• Accepts MIL-STD-188 serial remote control to 7,000 frequencies per filter for filter tuning, USN standard interface.
• Vis external adapter saccept remote control interface from ARC-210 family of radios. Can also provide an adapter for other radio interfaces.
• Because there is no combiner, not needed are the other subsystem operation management functions such as transmit inhibit during filter tuning, adjacent channel separation management, cross tuning prevention, etc.
• Spares commonality with USOM via same RFI/Switch Bank drawer part number.

What is it?

• A 4-Port UHF Switched Output Multicoupler (USOM).
• 4 tunable bandpass 4-pole filters, extremely-low-loss, 4-port impedance matching network with low pass filter for harmonics suppression, automated filter output switching termination.
• 4-port filter/multicoupler with built-in M3B Switch Bank for bypass of UHF filter/combiner for multiband radio operation in other bands/modes. Also enables USOM flexible integration into RFPinc’s M3B RFD.
• Remotely controlled, built-in M3B Switch Bank includes choices of individual bypasses for each radio, or any 1 of 4 bypass.
• Includes manual patch panel on rear face so that the USOM can be connected in different configurations either as stand alone or as part of RFPinc’s M3B RFD.
• Filter tuning remotely controlled.

What does it do?

• Enables 4 UHF transceivers to operate simultaneously on one antenna in the 225-400 MHz range, in any combination of transmit/receive modes.
• Enables multi-band software defined radios operation in different bands a modes.
• Accepts Australian Navy serial interface remote control to 7,000 frequencies per filter for filter tuning.  
• External adapter available to accept remote control interface from ARC-210 family of radios. Can also provide an adapter for other radio interfaces.
• From previous (pre-2009 year) CCT-4 multicoupler versions: Maximum deletion of obsolete functions and parts. Diminished source parts replaced. Backward radio system RF architecture interchangeability retained while forward radio/M3B RFD system is greatly expanded.
• Includes many other subsystem operation management functions such as transmit inhibit during filter tuning, Adjacent Channel Separation management, Cross Tuning Prevention, etc.